Naphthalimide based disperse dyes for nylon 6 and polyester (pet) fibers: Synthesis and evaluation of technical properties in the presence of urea

Technical properties of two naphthalimide based disperse dyes on nylon 6 and polyester fibers were investigated in the presence of urea.The two naphthalimide based disperse dyes were synthesized.The dyes were purified and then fully characterized using ~1H-NMR,FTIR and melting point analysis.Dispersion of the dyes was prepared in water and applied on nylon 6 and PET fibers.The dyes offered good build-up properties on the substrates.In order to increase dye adsorption of the substrates,urea was added into...     

Theoretical Study of 13C Chemical Shifts Structures of Some ortho-Substituted 3-Anilino-2-nitrobenzo[b]thiophenes and 2-Anilino-3-nitrobenzo[b]thiophenes and Comparison with Experimental

¹³C NMR chemical shifts have been calculated for structures of some substituted 3‐anilino‐2‐nitrobenzo‐[b]thiophenes ( 2 o) and 2‐anilino‐3‐nitrobenzo[b]thiophenes ( 3 o) derivatives containing OH, NH₂, OMe, Me, Et, H, F, Cl and Br. The molecular structures were fully optimized using B3LYP/6‐31G(d,p). The calculation of the ¹³C shielding tensors employed the GAUSSIAN 03 implementation of the gauge‐including atomic orbital (GIAO) and continuous set of gauge transformations (CSGT) by using 6‐311++G(d,p) basis set at density functional levels of theories (DFT). The isotropic and the anisotropy parameters of chemical shielding for all compounds are calculated. The predicted ¹³C chemical shifts are derived from equation δ=δ₀+δ where δ is the chemical shift, δ is the absolute shielding, and δ₀ is the absolute shielding of the standard TMS. Excellent linear relationships have been observed between experimental and calculated ¹³C NMR chemical shifts for all derivatives     

Fuzzy model prediction of Co (III)Al2O3 catalytic behavior in Fischer-Tropsch synthesis

The application of Co(Ⅲ)/Al2O3 catalyst in Fischer-Tropsch synthesis(FTS)was studied in a wide range of synthesis gas conversions and compared with Fuzzy Simulation results.Present study applies fuzzy model to predicting the product composition of CH4,CO2 and CO in Fischer-Tropsch process for natural gas synthesis,in which the input vector was 4-dimension including four variables(operating pressure, operating temperature,time and CO/H2 ratio)of 70 different experiments and the output product is a composition of CO2,CO and CH4. The Mamdani algorithm has been applied to the training of the fuzzy system and the test set was used to evaluate the performance of the system including R2,ARE,AARE and SD.The results demonstrated that the predicted values from the model were in good consistency with the experimental data.The work indicates how fuzzy inference system(FIS),as a promising predicting technique,would be effectively used in FTS.     

A Hexagonally Ordered Nanoporous Silica-Based Fiber Coating for SPME of Polycyclic Aromatic Hydrocarbons from Water Followed by GC–MS

A highly porous fiber coating material was prepared and functionalized with 3-amino propyl triethoxysilane (APTES) on hexagonally ordered nanoporous silica (SBA-15). Applicability of this coating was assessed employing a laboratory made solid-phase microextraction (SPME) device and gas chromatography–mass spectrometry for the simultaneous sampling and determination of trace polycyclic aromatic hydrocarbons (PAHs) from aqueous sample solutions. A one at the time optimization strategy was applied to investigate and optimize important extraction parameters such as extraction temperature, extraction time, ionic strength and sonication time. In the optimum conditions, the relative standard deviations for deionized water, spiked with selected PAHs were between 3.3 and 7.7% (n = 3), and detection limits for the studied compounds were 4.2 and 26.1 pg mL⁻¹. No significant change was observed in the extraction efficiency of the new SPME fiber, over 50 extractions. The proposed method was successfully applied to the extraction and determination of PAHs in the waste water samples.

     

Observation of inductive effects that cause a change in the rate-determining step for the conversion of rhenium azides to imido complexes

The cationic oxorhenium(V) complex [Re(O)(hoz)(2)(CH(3)CN)][B(C(6)F(5))(4)] [1; Hhoz = 2-(2'-hydroxyphenyl)-2-oxazoline] reacts with aryl azides (N(3)Ar) to give cationic cis-rhenium(VII) oxoimido complexes of the general formula [Re(O)(NAr)(hoz)(2)][B(C(6)F(5))(4)] [2a-2f; Ar = 4-methoxyphenyl, 4-methylphenyl, phenyl, 3-methoxyphenyl, 4-chlorophenyl, and 4-(trifluoromethyl)phenyl]. The kinetics of formation of 2 in CH(3)CN are first-order in both azide (N(3)Ar) and oxorhenium(V) complex 1, with second-order rate constants ranging from 3.5 × 10(-2) to 1.7 × 10(-1) M(-1) s(-1). A strong inductive effect is observed for electron-withdrawing substituents, leading to a negative Hammett reaction constant ρ = -1.3. However, electron-donating substituents on phenyl azide deviate significantly from this trend. Enthalpic barriers (ΔH(?)) determined by the Eyring-Polanyi equation are in the range 14-19 kcal mol(-1) for all aryl azides studied. However, electron-donating 4-methoxyphenyl azide exhibits a large negative entropy of activation, ΔS(?) = -21 cal mol(-1) K(-1), which is in sharp contrast to the near zero ΔS(?) observed for phenyl azide and 4-(trifluoromethyl)phenyl azide. The Hammett linear free-energy relationship and the activation parameters support a change in the mechanism between electron-withdrawing and electron-donating aryl azides. Density functional theory predicts that the aryl azides coordinate via N(α) and extrude N(2) directly. For the electron-withdrawing substituents, N(2) extrusion is rate-determining, while for the electron-donating substituents, the rate-determining step becomes the initial attack of the azide. The barriers for these two steps are inverted in their order with respect to the Hammett σ values; thus, the Hammett plot appears with a break in its slope.     

Molecular dynamics simulation of pressure-driven water flow in silicon-carbide nanotubes

Many properties of silicon carbide (SiC) nanotubes, such as their high mechanical strength and resistance to corrosive environments, are superior to those of their carboneous counterparts, namely, carbon nanotubes (CNTs) and, therefore, SiC nanotubes can be a viable alternative to CNTs in a variety of applications. We employ molecular dynamics simulations to examine flow of water in SiC nanotubes and to study the differences and similarities with the same phenomenon in the CNTs. The simulations indicate that SiC nanotubes always provide larger flow enhancements than those reported for the CNTs. Moreover, a given flow enhancement in SiC nanotubes requires an applied pressure gradient that is at least an order of magnitude smaller than the corresponding value in a CNT of the same size.     

Solvent‐free synthesis of new 2,4,6‐triarylpyridines catalyzed by a Brønsted acidic ionic liquid as a green and reusable catalyst

Some new 4‐(aryl)‐2,6‐di‐2‐naphthylpyridines and 4‐(aryl)‐2,6‐di‐2‐thienylpyridines have been prepared through three‐component condensation of 2‐acetylnaphthalene or 2‐acetylthiophene, aromatic aldehydes, and ammonium acetate in presence of 1‐(4‐sulfonylbutyl) pyridinium hydrogensulfate [(CH₂)₄SO₃HPy][HSO₄], a Brønsted acidic ionic liquid as a green and reusable catalyst in solvent‐free conditions. Also some new 4,4'‐(1,4‐phenylene)‐bis‐(2,6‐di‐aryl pyridine) was prepared. J. Heterocyclic Chem., (2011).     

Steady and Unsteady Heat Transfer in a Channel Partially Filled with Porous Media Under Thermal Non-Equilibrium Condition

Steady and pulsatile flow and heat transfer in a channel lined with two porous layers subject to constant wall heat flux under local thermal non-equilibrium (LTNE) condition is numerically investigated. To do this, a physical boundary condition in the interface of porous media and clear region of the channel is derived. The objective of this work is, first, to assess the effects of local solid-to-fluid heat transfer (a criterion indicating on departure from local thermal equilibrium (LTE) condition), solid-to-fluid thermal conductivity ratio and porous layer thickness on convective heat transfer in steady condition inside a channel partially filled with porous media; second, to examine the impact of pulsatile flow on heat transfer in the same channel. The effects of LTNE condition and thermal conductivity ratio in pulsatile flow are also briefly discussed. It is observed that Nusselt number inside the channel increases when the problem is tending to LTE condition. Therefore, careless consideration of LTE may lead to overestimation of heat transfer. Solid-to-fluid thermal conductivity ratio is also shown to enhance heat transfer in constant porous media thickness. It is also revealed that an increase in the amplitude of pulsation may result in enhancement of Nusselt number, while Nusselt number has a minimum in a certain frequency for each value of amplitude.